Safety and installation instructions
MagicComfort MSH50, MSH501
20
Observe the following instructions when working with electrical parts:
z
When testing the voltage in electrical cables, only use a diode test lamp
(fig.
1
8, page 3) or a voltmeter (fig.
1
9, page 3).
Test lamps with an illuminant (fig.
1
12, page 3) take up voltages which
are too high and which can damage the vehicle's electronic system.
z
When making electrical connections (fig.
3
, page 4), ensure that
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection.
z
Insulate all connections.
z
Secure the cables against mechanical wear with cable binders or insulat-
ing tape, for example to existing cables.
Observe the following instructions when using the seat heater:
z
Do not place any sharp or heavy objects on the seat, as the seat heater
could otherwise be damaged.
z
Persons with an impaired sensitivity to heat should only operate the seat
heater at level I.
z
Do not place any heat insulating objects, such as blankets or coats, on the
seat when the seat heater is switched on.
z
The seat heater can be damaged by fluids spilt on the seat.
z
Never switch the seat heater on when it is wet.
_MSH50_MSH501.book Seite 20 Donnerstag, 13. August 2009 2:48 14
