Connection
ECL-76, ECL-102, ECL-103
EN
108
7.5
DC-Kit2 with Dometic FreshJet1100/1700/2200,
FreshLight1600/2200
Roof air conditioner:
– Dometic FreshJet1100/1700/2200
– Dometic FreshLight1600/2200
Circuit diagram:
– Dometic FreshJet1100/1700/2200: fig.
6
, page 8
– Dometic FreshLight1600/2200: fig.
7
, page 9
Charging current distributor: ECL-102
Inverter:
– Dometic FreshJet1100/1700/2200: SinePower MSI1812T
– Dometic FreshLight1600/2200: PerfectPower PP2002
➤
Install inverter remote control MCR9 (membrane button) in an easily-accessible place
and connect its cable to the inverter.
➤
Remove the FreshJet/FreshLight’s outlet panel, if necessary remove the upper cover.
➤
Connect the wire sleeves of the universal connection cable to contacts I5 and I2 on the
charging current distributor.
➤
Join the on/off cable of the FreshJet1100/1700/2200, FreshLight1600/2200 to the plug
connector on the circuit board (fig.
r
, page 29 for FreshJet and fig.
s
, page 29 for
FreshLight).
I
➤
Connect both the wires on the universal connection cable (item no. 4441300124) to the
two wires on the on/off cable of the FreshJet1100/1700/2200, FreshLight1600/2200.
7.6
DC-Kit3/DC-Kit5 with Dometic
CA1000/CA2500/B2200/B1600 Plus
Roof air conditioner:
– CA1000/CA2500
– B1600 Plus/B2200
Circuit diagram:
– CA1000/CA2500: fig.
8
, page 10 (12 V), fig.
d
, page 16 (24 V)
– B1600 Plus/B2200: fig.
9
, page 11 (12 V), fig.
e
, page 17 (24 V)
Charging current distributor: ECL-102/ECL-103
Inverter: SinePower MSI1812T/MSI1824T
➤
Install inverter remote control MCR9 in an easily-accessible place (jumper closed, refer
to remote control installation manual) and connect its cable to the inverter.
NOTE
Guide the on/off cable carefully past the fan.
