Waeco CoolMatic CRX50, Installation And Operating Manual

Page: 46 / 380

EN
Installing and connecting the refrigerator CoolMatic
46
➤ Connect your refrigerator to a plug socket which is fuse-protected with at
least 15 A (at 12 V) or 7.5 A (at 24 V) (fig.
d
1, page 9).
➤
Connect the red cable (fig. d rt, page 9) to the positive terminal of the
battery.
➤
Connect the black cable (fig. d sw, page 9) to the negative terminal of
the battery.
Connecting the refrigerator to AC voltage
D
You can connect the refrigerator to 100 – 240 V
w
AC power if you use the
MPS 35 rectifier ( accessory ).
The MPS 35 rectifier features a priority circuit which conserves the battery
connected. When a 100 – 240 V
w
mains connection is used, the rectifier
automatically switches from battery to mains operation.
When disconnected from the 100 – 240 V
w
mains supply, the rectifier auto-
matically switches back to battery operation. Mains operation via the rectifier
always takes priority over battery operation.
Proceed as follows when you connect the refrigerator to the AC supply:
➤
Attach the rectifier on the back of the refrigerator.
➤
Connect the rectifier as shown in fig. e , page 9.
➤
Connect the refrigerator to the rectifier (fig. e 2, page 9):
– Red cable: positive battery terminal
– Black cable: negative battery terminal
➤ Plug the connector into the AC socket (fig.
e
1, page 9).
DANGER! mortal danger!
 Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
 If you are operating your refrigerator on board a boat with an
AC mains connection using a shore connection, you must
install a residual current circuit breaker between the AC mains
supply and the refrigerator.
Seek advice from a trained technician.