Waeco CoolMatic CD30, Installation And Operating Manual

Page: 23 / 204

EN
CD30 Operation
23
➤ If you wish to set the temperature to cooling , turn the thermostat knob
(see fig.
2
2, page 3), to the desired temperature range.
7.4 Switching off the coolbox
I
➤
Open the coolbox drawer.
➤
To switch off the coolbox, turn the thermostat knob (see fig. 2 2, page 3)
to the “0” position.
✓
The coolbox is switched off.
➤
If you wish to stop using the coolbox, disconnect the connecting cable
from the battery.
7.5 Defrosting
Humidity can form frost in the interior of the cooling device. This reduces the
cooling capacity. Defrost the device in good time to avoid this.
A
➤
Take the food or other objects out of the device and place it in another
cooling device to keep it cool, if necessary.
➤
Switch the cooling device off (see chapter “Switching off the coolbox” on
page 23) and leave the drawer open.
➤
Wipe off the water resulting from defrosting or – if present – empty the col-
lecting tray.
NOTE
If you wish to leave the cooling device switched off for a longer pe-
riod, clean it and leave the drawer slightly open. This will prevent
unpleasant odours from forming.
NOTICE!
Do not remove the layer of ice with hard or sharp tools. These can
damage the plastic of the vaporiser.