Waeco CoolFreeze CFX28, Operating Manual

Page: 40 / 340

EN
Operation CFX28 – CFX65DZ
40
I
✓
The cooler starts cooling the interior.
I
Latching the cooler lid
➤
Close the lid.
➤
Press the latch (fig. 2 1, page 3) down, until it latches in place audibly.
7.6 Setting the temperature
➤
Press the “SET” button (fig. 3 4, page 3) once.
➤
Use the “UP +” (fig. 3 7, page 3) and “DOWN –” (fig. 3 6, page 3)
buttons to select the cooling temperature.
✓
The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is dis-
played again.
NOTE
Displayed temperature
 CFX28, CFX35, CFX40, CFX50, CFX65:
The temperature displayed is that of the large interior
compartment (e.g. CFX50, CFX65: fig.
7
1, page 5).

CFX65DZ:
– With fridge/freezer divider in: The temperature displayed is
that of the freezer compartment (fig. 8 1, page 5).
– With fridge/freezer divider out: The actual compartment
temperature will be considerably warmer than the dis-
played temperature
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “
P
” flashes orange.