Waeco CoolFreeze CDF16, Operating Manual

Page: 24 / 216

EN
Operation CoolFreeze CDF16
24
5.1 Operating and display elements
fig.
2
, page 3
6 Operation
6.1 Before initial use
I
Item Description Explanation
1 ON
OFF button Switches the cooler on or off when the button is
pressed for between one and two seconds
2 POWER Status indication
LED lights up green: Compressor is on
LED lights up orange: Compressor is off
LED flashes orange: Display switched off auto-
matically due to low battery
voltage
3 ERROR LED flashes red: Device is switched on but
not ready for operation
4 SET Selects the input mode
– Temperature setting
– Celsius or Fahrenheit display
– Set battery monitor
5 – Display, shows the information
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature
unit (°C or °F).
6 UP + Press once to increase the value
7 DOWN – Press once to decrease the value
NOTE
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter “Cleaning and maintenance” on
page 29).