EN
CFX35 – CFX65DZ
Operation
39
I
✓
The cooler starts cooling the interior.
I
Latching the cooler lid
➤
Close the lid.
➤
Press the latch (fig.
2
1, page 3) down, until it latches in
place audibly.
6.6
Setting the temperature
➤
Press the “SET” button (fig.
3
4, page 3) once.
➤
Use the “UP +” (fig.
3
7, page 3) and “DOWN -” (fig.
3
6,
page 3) buttons to select the cooling temperature.
✓
The cooling temperature appears in the display for a few
seconds. The display flashes several times and then the current
temperature is displayed again.
6.7
Using the emergency switch (where fitted)
The emergency switch (fig.
5
1, page 4) is located below the con-
trol panel. For normal operation the switch is in the “NORMAL USE”
position.
➤
If an electronic control failure occurs, slide the switch to
“EMERGENCY OVERRIDE” position
I
NOTE
Displayed temperature
CFX 35, CFX 40, CFX 50, CFX 65:
The temperature displayed is that of the large interior com-
partment (fig.
7
1, page 5).
CFX 65DZ:
With fridge/freezer divider in: The temperature displayed is
that of the freezer compartment (fig.
8
1, page 5).
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “
P
” flashes orange.
NOTE
If the switch is in the “EMERGENCY OVERRIDE” position, the
cooler freezes with full cooling capacity.
