Waeco CF-1, Instruction Manual

Page: 18 / 27

19
CoolFreeze Technical Data
CF-18
➤
Slide the sliding switch (Fig. 3 4, page 4) to “LOW” or “HIGH”
battery protection (See 6.4 “using the battery monitor” for suitable
level).
✔
The “POWER” LED is lit green.
✔
The cooler starts cooling the interior.
✔
When the cooling temperature has been reached, the “POWER” LED
is lit amber.
CF-25, CF-35, CF-40, CF-50, CF-60
➤
Press the “ON/OFF” button (Fig. 4 1, page 5) and hold down for
between one and two seconds.
✔
The “POWER” LED lights up.
✔
The display (Fig. 4 5, page 5) switches on and shows the current
temperature.
Note – Displayed temperatures (Digital display models only) .
CF-25, CF-35, CF-40, CF-50, CF-60 (Not CF-50DZ)
The temperature displayed is that of the middle of the large interior
compartment.
CF-50DZ
i
With plastic dividers in : the display temperature is that of the
middle of the freezer compartment (furthest away from control
panel).
ii With plastic dividers removed : the actual compartment
temperature will be considerably warmer than the displayed
temperature.
ALL MODELS
Temperatures elsewhere in the compartment (away from centre) will
deviate from the displayed temperature.
✔
The cooler starts cooling the interior.
Locking the cooler
➤
Close the lid.
➤
Press the lock (Fig. 2 1, page 4) down, until it latches in place
audibly.
CF18-60_M_81003:PowerVac_PV-100 3/9/08 3:53 PM Page 19