EN
5
ASC G Wi-Fi kit
Setting up the Wi-Fi kit
5
Setting up the Wi-Fi kit
The ASC G Wi-Fi kit can be used in the
Access Point Mode
(default set-
ting) or in the
Client Mode
.
When used in
Access Point Mode
the ASC G Wi-Fi kit serves as a hot
spot. You can log into the Wi-Fi kit‘s network with any device to connect
to the ASC, see figure:
When used in
Client Mode
the ASC G Wi-Fi kit is connected to your
existing Wi-Fi network and you can use all devices connected to this net-
work to connect to the ASC, see figure:
5.1
Overview
1. Decide in which mode you would like to use the ASC G Wi-Fi kit.
2. If you choose Client Mode, first set the ASC G Wi-Fi kit to Client
Mode (see chapter “Setting Wi-Fi kit to Client Mode” on page 5)
I
5.2
Setting Wi-Fi kit to Client Mode
You can do this either at the ASC‘s control panel (chapter “Setting
Wi-Fi kit to Client Mode on the ASC” on page 6) or more comfortable via
a web browser on a connected device (chapter “Setting Wi-Fi kit to Client
Mode via web browser” on page 6).
NOTE
Instead of the detailed description in the next sections you can also use
the flow chart in the appendix, if that suits you better.
WaecoWiFiKit_OPM_4445103184_EMEA36_202x-xx-xx.book Seite 5 Mittwoch, 3. Februar 2021 11:33 11
