Waeco ASC 6300 G LE, Operating Manual

Page: 31 / 254

EN
14.5 Changing the dryer filter
1.
In the basic menu use the cursor keys or to select
Free selection
.
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3. Skip the query requesting
CAR DATA
.
4. Select
Rec/Recycling phase
.
5. Set the
Pressure increase Test time
to
1
.
6. Press ENTER to confirm.
7. Deselect
Vacuum phase
using
No
.
8. Press ENTER to confirm.
9. Deselect
Filling phase
using
No
.
10. Press ENTER to confirm.
11. Select
Process start
.
12. Press ENTER to confirm.
The service hoses will now be drained and the A/C service unit's basic menu will be activated. The compressor
has produced a slight internal vacuum so that the filter can be replaced with minimal refrigerant loss.
13. Switch off the A/C service unit.
14. Pull out the power supply plug.
15. CAUTION! Health hazard
The following steps may only be performed by authorized personnel. Wear protective gloves and gog-
gles.
Unscrew the screw (D) from the holder, and pull the dryer filter straight out.
31