EN
Initial start-up
BMW5500G RPA
96
7.10
Inserting the containers for oil and UV additive
I
The current supply quantities are displayed in the standby menu.
1. Open the cover flap (
23
) on the left side and push the containers into
the snap locks:
– Container for fresh oil (
20
)
– Container for UV additive (
21
) and
– Drained oil receptacle (
22
)
2. Close the cover flap (
23
).
3. Enter the container size for fresh oil and UV contrast agent (see
chapter “Entering the container size” on page 97
).
NOTE
Only use approved oils and UV additive for R-1234yf. Observe the
manufacturer's instructions.
21
20
23
22
WaecoBMW5500GRPA_OPM_4445102321_EMEA(de-en-es-fr-ru)_202x-xx-xx.book Seite 96 Freitag, 6. November 2020 9:04 21
