Waeco AirCon Service OZ1000, Operating Manual

Page: 15 / 124

EN
OZ1000 Using the ozone generator
15
6 Using the ozone generator
!
I
6.1 Purifying the vehicle interior
➤
Connect one end of the 230 V cable to the socket (fig. 1 3, page 2).
➤
Connect the other end of the 230 V cable to the 230 V mains.
✓
The 15-min-LED (fig. 2 2, page 2) lights up green.
➤
Press the START/STOP button (fig. 1 1, page 2).
✓
The 15-min-LED flashes.
➤
Press the START/STOP button (fig. 1 1, page 2).
✓
The 15-min-LED lights up.
The ozone generator produces ozone for 15 minutes.
➤
Press the ON/OFF button on the control panel (fig. 1 5, page 2) twice
until it lights up to produce ozone for 30, 45 or 60 minutes.
➤
Close all the doors and windows of the vehicle.
✓
Once the selected time has elapsed, the ozone generator stops automat-
ically.
➤
If you want to stop the purifying procedure before the time has elapsed,
press the START/STOP button (fig.
1 1, page 2) several times until the
ozone generator stops and the 15-min-LED lights up green.
CAUTION!
 Make sure that nobody enters the vehicle or is in the vehicle
during operation.
 Air the vehicle after the purifying operation for 15 minutes.
NOTE
 Do not perform the purifying operation in the sunlight. At tem-
peratures of above 25 °C, the ozone quickly degenerates and
is less effective. If the temperature inside the vehicle is above
25 °C, let the vehicle cool down before performing the purify-
ing operation.
 Remove all sources of fragrance.