Wadia 7, Information & Operation Manual

Page: 12 / 22

Wadia 7 CD TRANSPORT
INDEX: Pressing this button activates the Index Play mode. While a compact disc is playing,
when the INDEX button is pressed. two dashes (- with the first dash blinking) will appear
under the word Index in the display window. You can then designate the desired Index Point
you would like to access directly through the numeric buttons (for example 0 followed by 4 will
access Index Point 4;
followed by 7 will access Index Point 17, etc.)
CHECK: When a sequence of tracks has been programmed, the CHECK button can be used
to review the contents of that program. After a program has been entered, but before
playback has begun, by pressing the CHECK button once, the first progammed track number,
its position in the sequence of tracks that have been programmed, and the playing time of the
entire sequence, will be displayed. Each subsequent pressing of the CHECK button will
provide similar details as you move through each of the programmed tracks.
The programmed contents of a sequence can also be checked during playback, however, the
total program’s playback time will not be displayed.
SKIP: Pressing these buttons allows access to the previous or next track on a disc.
INDEX: Pressing these button allows the access to the previous or next Index Point within a
track that has such indexed sections.
AUTO SPACE: Pressing this button will provide a four second space between tracks on a
disc, irrespective of the actual time between tracks on the disc.
OPEN / CLOSE: Pressing this button opens the disc drawer; pressing it again closes the
drawer. Pressing this button while a compact disc is playing stops play, clears any previously
programmed sequence of tracks, and opens the drawer.
STOP: Pressing this button while a Compact Disc is playing stops PLAY. When play is
stopped, the CHECK button can be utilized to review a sequence of programmed tracks.
Pressing this button twice clears any previously programmed sequence of tracks from the
Transport’s memory.
PAUSE: Pressing this button, while a Compact Disc is playing, suspends PLAY. Pressing the
PLAY button will resume PLAY at the point where the PAUSE button was pressed.
PLAY: After a Compact Disc is loaded into the drawer, pressing this button plays the disc
beginning with the first track on the disc or in a sequenced program. Pressing this button
while the drawer is open, closes the drawer and begins play with the first track on the disc or
in a sequenced program.
NUMERIC KEYS: These buttons (1 through 9, 0, and10+ may be used to select tracks when
programming a sequence of tracks to be played. The numeric keys may also be used to
select a particular track (instead of using the << SKIP or SKIP >> buttons). Pressing a track
number begins play with that track and continues playing tracks on the disc in sequence.
REPEAT: Pressing this button will cause the entire disc to repeat continuously. Pressing this
button a second time will take the Transport out of the REPEAT mode. Pressing this button
once, following pressing of the SINGLE button, will cause the track that is playing, or has
been selected, to repeat continuously. Pressing either the STOP or OPEN / CLOSE buttons
will also take the Transport out of the REPEAT mode.
12