Wadax Arcadia DAC, User Manual

Page: 7 / 19

7
The Wadax Arcadia DAC has been especially designed to minimize vibration effects on the audiocir-
cuits. The DAC has been designed with four adjustable conical feet. These are used to ensure proper
vibration transmission to the DAC support in order to evacuate all detrimental vibrations inside the unit,
following Wadax Mechalock fundamentals.
SETUP AND INSTALLATION
CHOICE OF DAC LOCATION
If the line voltage provided is not appropriate as supplied, please consult your dealer.
ATTENTION: At the 220V setting, the Wadax Arcadia DAC will function properly for main line vol-
tages between 200V and 240V. At the 110V position, the main line must deliver between 105 and
125V. If your main supply operates out of these tolerances, please consult your Wadax dealer.
This fuse is located on the power cord receptacle and can be accessed by raising the cover
using a small screwdriver when the power cord has been removed (ensuring power is discon-
nected before handling). Use a 2.5A slowblow fuse. Always ensure that the fuse cover is fitted.
WARNING!