Wacom PENPARTNER - USB, Quick Start Manual

Page: 14 / 36

12
Problem Hint
Double-clicking is difficult.
Be sure you are quickly tapping the tablet twice in
the same place on the tabletʼs active area. Using
the side switch to double-click is recommended .
Try increasing the DOUBLE-CLICK DISTANCE.
Try using a lighter TIP FEEL.Try setting your
system to launch programs with a single click.
The pen selects everything,
will not stop drawing.
Open the Tablet control panel. Move the TIP
FEEL slider toward FIRM.
You notice a screen delay
at the beginning of pen
strokes.
In the Tablet control panel, try decreasing the
DOUBLE-CLICK DISTANCE.
You have to press hard with
the pen when clicking or
drawing. Open the Tablet control panel. Move the TIP
FEEL slider toward SOFT.
The pen tip does not function.
Make sure the status LED changes from orange to
green when the tip is pressed. If it does not, you
may have defective hardware (
⇨ P10).
The side switch does not
work.
Be sure you press the side switch when the pen tip
is in proximity—do this without pressing down
on the pen tip. Make sure the tablet status LED
changes from orange to green when you press the
side switch. If it does not, you may have defective
hardware (
⇨ P10).
The screen cursor jumps
back when using your
regular mouse or trackball.
Do not place the pen on the tablet when using
another pointing device. Leaving your tool on the
tablet may interfere with screen cursor positioning
when using other input devices.
Troubleshooting
UM-0295_PenPartner.indd 12 04.10.8 2:31:14 PM