12
12
Cintiq cabling diagram
– A –
DVI-I to DVI-D Dual-Link, DisplayPort,
or DVI-I to VGA
Video card:
DVI, DisplayPort, or VGA
– C –
DC input. Connect to
display stand extension
cable.
AC
– D –
Power adapter
Caution
Do not connect or disconnect the video or power cables while Cintiq or your computer are turned on.
This can damage the display or computer video card.
Only use a power adapter specified for use with your pen display. Use of an improper power adapter may
damage the unit.
For optimum performance, the display refresh rate should use a vertical frequency of 60 Hz. Make sure the
refresh rate does not exceed the maximum vertical frequency (85 Hz) that Cintiq can support. See the
Important Product Information guide for specifications.
Connection cables are pre-installed.
•
DVI-D. Connector located at display stand base.
•
DisplayPort. Remove cover to access cable. See
.
•
VGA. Requires removal of DVI-I to DVI-D cable and replacement with the
provided DVI-I to VGA cable. See
.
•
USB. Connector located at display stand base.
– B –
USB
