background image

Safety Information

WP 1030A

wpm_si000443gb.fm

8

1.4

Service Safety

A poorly maintained machine can become a safety hazard!  In order
for the machine to operate safely and properly over a long period of
time, periodic maintenance and occasional repairs are necessary. 

1.4.1

Do  not  attempt  to  clean  or  service  the  machine  while  it  is  running.
Rotating parts can cause severe injury.

1.4.2

Do  not  crank  a  flooded  engine  with  the  spark  plug  removed  on
gasoline-powered engines. Fuel trapped in the cylinder will squirt out
the spark plug opening.

1.4.3

Do  not  test  for  spark  on  gasoline-powered  engines  if  the  engine  is
flooded or the smell of gasoline is present. A stray spark could ignite
the fumes.

1.4.4

Do not use gasoline or other types of fuels or flammable solvents to
clean  parts,  especially  in  enclosed  areas.  Fumes  from  fuels  and
solvents can become explosive. 

1.4.5

Keep the area around the muffler free of debris such as leaves, paper,
cartons, etc.  A hot muffler could ignite the debris and start a fire.

1.4.6

Replace worn or damaged components with spare parts designed and
recommended by Wacker Neuson Corporation.

1.4.7

Disconnect  the  spark  plug  on  machines  equipped  with  gasoline
engines, before servicing, to avoid accidental start-up.

1.4.8

Keep the machine clean and labels legible. Replace all missing and
hard-to-read  labels.  Labels  provide  important  operating  instructions
and warn of dangers and hazards.

  

WARNING

Summary of Contents for WP 1030A









































Reviews: