manualshive.com logo in svg

Wacker Neuson WM 650, Operator'S Manual

Share
Download
Wacker Neuson WM 650 Operator'S Manual Download Page 14

WM 650 / WM 720

Emission Control System Information

wc_tx000239gb.fm

14

7)

Wacker is liable for damages to other engine components
proximately caused by a failure under warranty of any warranted
part.

8)

Throughout the engine warranty period stated above, Wacker will
maintain a supply of warranted parts sufficient to meet the
expected demand for such parts.

9)

Any replacement part may be used in the performance of any
warranty maintenance or repairs and must be provided without
charge to the owner. Such use will not reduce the warranty
obligations of Wacker.

10) Add-on or modified parts that are not exempted by the Air

Resources Board may not be used. The use of any non-
exempted add-on or modified parts by the ultimate purchaser will
be grounds for disallowing a warranty claim. Wacker will not be
liable to warrant failures of warranted parts caused by the use of
a non-exempted add-on or a modified part.

Summary of Contents for WM 650































Reviews:

No comments

Brands by name

Popular brands

Load more brands