Wacker Neuson VPH70 Operator'S Manual Download

Page: 29 / 32

Maintenance

VPH70

wpm_tx001813gb.fm

5.11 Transporting Machine

See Graphic: wpmgr008418

To avoid burns or fire hazards, let engine cool before transporting
machine or storing indoors.

5.11.1 Turn fuel valve to the off position and keep the engine level to prevent

fuel from spilling.

5.11.2 Tie down machine on vehicle to prevent machine from sliding or tipping

over. Tie machine to vehicle at points shown on graphic.

5.12 Storage

If plate is being stored for more than 30 days:

5.12.1 Remove loose stones and dirt from plate.
5.12.2 Clean engine cylinder cooling fins.
5.12.3 Clean or replace air filter.
5.12.4 Change exciter oil.
5.12.5 Change engine oil and follow procedures described in engine manual

for engine storage.

5.12.6 Cover plate and engine and store in a clean, dry area.

WARNING

wpmgr008418

Summary of Contents for VPH70

































Search results

Summary of Contents for VPH70

Reviews:

Related manuals for VPH70

Brands by name

Popular brands

Wacker Neuson VPH70, Operator'S Manual

Search results

Summary of Contents for VPH70

Reviews:

Related manuals for VPH70

Brands by name

Popular brands