11 Maintenance
100_0101_mt_0007.fm
43
11.3
Maintenance work
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following
benefits:
Protection of the machine of contamination on the construction site.
A level and clean work surface makes work easier.
There is a better overview over small parts and they are not lost as easily.
Visual inspection for damage
X
All of the components of the HMS for damage check.
X
Drive motor and GFCI check for any damage, cracks or.
X
ON/OFF switch
on the drive motor to check the function.
X
See the Use and Operation
chapter for how to check the GFCI for proper
functioning.
Check wear dimensions of
the vibrator head.
Lubricate flexible shaft and
replace plastic bushing.
Change oil in vibrator head. *
* Have these tasks carried out by the service department of your Wacker Neuson
contact person.
WARNING
A damaged machine part, protective hose or power cable can result in personal
injury caused by electric current.
X
Do not operate a damaged machine.
X
Have a damaged machine repaired immediately.
Task
Daily be-
fore oper-
ation
Every
50 hrs.
Every
100 hrs.
Every
300 hrs.