11 Maintenance
100_0101_mt_0018.fm
25
11.3
Maintenance work
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following benefits:
Protection of the machine of contamination on the construction site.
A level and clean work surface makes work easier.
There is a better overview over small parts and they are not lost as easily.
Checking the wear dimensions of the vibrator head
Wear dimensions:
Minimum diameter of lower tube øL
L
Minimum diameter of vibrator head øL at measuring point L
Length of vibrator head L
L
Wear is highest at the end of the vibrator head.
Let the vibrator head be exchanged by your Wacker Neuson contact if the wear dimensions are reached
at a certain point.
The vibrator head assembly must be replaced by the service department of the Wacker_Neuson contact
partner.
Dimensions in bold are wear dimensions.
Dimensions in brackets are original dimensions of new machines.
WARNING
A damaged machine part, protective hose or power cable can result in personal injury
caused by electric current.
Do not operate a damaged machine.
Have a damaged machine repaired immediately.
Machine
type
Dimensions for vibrator head and lower tube [mm]
øL
L
L
L
øL
L
IEC38
33
(38)
275
(285)
35
(38)
180
IEC45
38
(45)
315
(327)
42
(45)
194
IEC58
50
(58)
390
(400)
54
(58)
205
Summary of Contents for IEC
Page 32: ......
