Wacker Neuson HAL 300, Operator'S Manual

Page: 6 / 84

Wacker HAL 300 Safety Information
wc_si000242gb.fm
EN-4
2.1 Operating Safety
2.1.1 ALWAYS read, understand, and follow procedures in the Operator’s
Manual before attempting to operate the machine.
2.1.2 ALWAYS store the machine properly when it is not being used. The
machine should be stored in a clean, dry location out of the reach of
children.
2.1.3 ALWAYS operate the machine with all safety devices and guards in
place and in working order.
Possible eye injury! When the laser is not rotating, do not stare into the
pointing beam.
2.2 Service Safety
A poorly maintained machine can become a safety hazard! In order
for the machine to operate safely and properly over a long period of
time, periodic maintenance and occasional repairs are necessary.
2.2.1 All adjustments and repairs MUST be completed before operation.
NEVER operate the machine with a known problem or deficiency! All
repairs and adjustments should be completed by a qualified
technician.
2.2.2 DO NOT modify the machine without the express written approval of
the manufacturer.
2.2.3 ALWAYS keep the machine clean and labels legible. Replace all
missing and hard-to-read labels. Labels provide important operating
instructions and warn of dangers and hazards.
2.2.4 ALWAYS do periodic maintenance as recommended in the Operator’s
Manual.
CAUTION
WARNING