OM EZ38 us 1.1 * ez38w700.fm
7-1
7
7
Maintenance
7.1
Important information on maintenance
Responsibilities and prerequisites
The working order and the service life of machines are heavily dependent
on maintenance.
Daily and weekly service and maintenance on or with the machine must
be performed by specifically trained personnel.
Have the maintenance on or with the machine, delivery inspection and the
entries in the service booklet performed by a Wacker Neuson service
center, otherwise warranty claims will not be acknowledged.
It is therefore in the interest of the machine owner to perform the
mandatory maintenance on or with the machine.
This ensures optimal machine operation. Immediately repair or replace
parts that are already damaged or not working properly before they are
due for replacement.
Repair or replacement of safety-relevant parts may only be performed by
a Wacker Neuson service center.
Use only original spare parts for repairs.
The manufacturer shall not be liable for damage to the machine or injury
caused by failure to observe the specific notices and descriptions
Important safety instructions on maintenance on or with the machine
• Follow all safety instructions given in this Operator’s Manual.
• Follow the instructions given in chapter
Safety,
safety instructions
on maintenance
and
qualification of the operating and mainte-
nance personnel
in this Operator’s Manual.
• Follow the maintenance and safety instructions given in the Operator’s
Manuals of the attachments.
• Wear protective gloves and clothing.
• Follow the danger indications and safety instructions when performing
maintenance on or with the machine.
• In order to avoid risk of injury, do not perform work on a hot and
running engine.
• Use a suitable container to collect engine/machine fluids as they flow
out and dispose of them in an environmentally friendly manner.
• Attach a warning label to the control elements (for example
“Machine
being serviced, do not start”
).
• Stop the machine (see Preparing lubrication).
Summary of Contents for EZ38
