Wacker Neuson ET09-02 Operator'S Manual Download Page 61

Page: 61 / 248

BA ET16 de* 1.0 * et16i400.fm

4-1

Putting into operation 4

Putting into operation

4.1

Cabin

Safety instructions regarding entry and exit

CAUTION

Falling hazard when entering or exiting!

Entering or exiting incorrectly can cause injury.

►

Keep the mandatory climbing aids

clean and use only them for

entering and exiting.

►

Face the machine as you enter and leave it.

►

Have damaged climbing aids replaced immediately. Do not operate the
machine.

CAUTION

Crushing hazard due to unlocked cabin door!

Unlocked cabin doors can cause crushing.

►

Lock the cabin door.

►

Use the handholds for closing.

CAUTION

Injury hazard when opening or closing the front window!

Opening or closing the front window can cause injury.

►

Use both handles.

►

Duck your head.

►

Let both locks lock into place.

►

Keep body parts and clothes away from the window channel.

Putting into operation

Summary of Contents for ET09-02

























































































































































































































































Search results

Summary of Contents for ET09-02

Reviews:

Related manuals for ET09-02

Brands by name

Popular brands

Wacker Neuson ET09-02, Operator'S Manual

Search results

Summary of Contents for ET09-02

Reviews:

Related manuals for ET09-02

Brands by name

Popular brands