Wacker Neuson EH 23, Operation Manual, Page: 30 / 52

Operation
30
Breaking off material
1. Place the hammer on the material to be broken off.
2. Press the ON/OFF switch.
Note: When the ON/OFF switch is pressed, the machine starts to run at full
speed immediately.
Work tips
„
When working, use the weight of the hammer.
„
Pressing forcefully against the material to be worked on does not improve the
machine's performance.
„
Press the machine against the material to be worked as follows:
„
Apply at least 100 N pressure.
„
Press with sufficient strength that the machine noticeably locks into place.
„
Apply somewhat less pressure as soon as you feel the lower stop.
WARNING
Injuries from insufficiently guided or uncontrolled machine.
f Always hold machine with both hands and stand firmly.
Item Designation
1 ON/OFF switch