3-10
BA DT08 SL EN – Edition 1.0 * * dt08b330.fm
Operation
Manual starter
Caution!
Do not allow starter handle
C
to whiplash against the engine.
☞
Carefully move back handle
C
to avoid damage to the starter.
☞
Slightly pull starter handle
C
until you can feel a resistance, then slowly release starter
handle
C
.
☞
Press decompression lever
D
all the way down.
☞
Firmly and quickly pull starter handle
C
with both hands
➥
If the engine does not start:
☞
Repeat the procedure.
Notice!
The engine will not start unless the cable is pull fully and firmly!
Electric starter
☞
Turn the ignition key to position
1
Turn and hold the ignition key in position
3
until the engine starts
➥
If the engine does not start after 5 seconds
☞
Stop starting the engine and try again after 10 seconds
➥
If the engine still does not start after the second try
☞
Contact a Wacker Neuson workshop for troubleshooting
➥
As soon as the engine runs:
☞
Release the ignition key
Notice!
Do not actuate the electric starter for more than 5 seconds.
Fig. 35: Starter handle
C
Fig. 36: Decompression lever
D
Fig. 37: Starting
1
3