manualshive.com logo in svg

Wacker Neuson Cub 300 HD, Operator'S Manual

Share
Download
Wacker Neuson Cub 300 HD Operator'S Manual Download Page 33

Cub 200/300/300 HD

Maintenance

wcghi_tx000721gb.fm

33

4.6

Inspecting and Cleaning the Cadmium (CAD) Cell

See Graphic: wcghi_gr004021

To inspect and clean the CAD cell, carry out the following procedure.

4.6.1

Remove the burner assembly. See section 

Removing and Installing

the Burner Assembly.

4.6.2

Twist and pull out the plastic protective holder 

(1)

 off the base of the

burner assembly. The CAD cell is inside this plastic holder.

4.6.3

Inspect the CAD cell for the following:
•

Cleanliness. Be sure the cell is free of debris or soot.

4.6.4

Clean the cell if necessary.

NOTICE: 

Do NOT use solvents or liquids to clean the CAD cell. Use a

soft dry cloth to clean the CAD cell.

4.6.5

Reinstall the plastic protective holder 

(1)

 onto the base of the burner

assembly.

4.6.6

Reinstall the burner assembly. See section 

Removing and Installing

the Burner Assembly.

Summary of Contents for Cub 300 HD





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands