Wacker Neuson CRT 48, Operator'S Manual

Page: 44 / 76

wc_tx000642gb.fm
44
Maintenance CRT 48
5.15 Kohler—Engine Oil and Filter
Change oil every 125 hours and oil filter (b) every 250 hours. On new machines,
change oil after first 50 hours of operation. Drain oil while engine is still warm.
Note:
In the interests of environmental protection, place plastic sheeting and a
container under the machine to collect the liquid which drains off. Dispose of this
liquid properly.
To change oil:
1. Remove oil filler cap (a) and oil drain plug (c). Drain oil into a suitable container.
2. Reinstall the drain plug and tighten.
3. Remove and replace oil filter (b) .
4. Remove oil filler cap (a) and fill engine crankcase with recommended oil. See
Technical Data
for oil quantity and type.
5. Install oil filler cap.
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged
periods of time.
f Take steps to avoid inhaling or ingesting used engine oil.
f Wash skin thoroughly after exposure to used engine oil.