BS 50-4s
Safety Information
wc_si000403gb.fm
19
•
Do not refuel if the machine is positioned in a truck fitted with a
plastic bed liner. Static electricity can ignite the fuel or fuel vapors.
2.5
Service Safety
A poorly maintained machine can become a safety hazard! In order
for the machine to operate safely and properly over a long period of
time, periodic maintenance and occasional repairs are necessary.
Personal Protective Equipment (PPE)
Wear the following Personal Protective Equipment (PPE) while
servicing or maintaining this machine:
•
Close-fitting work clothes that do not hinder movement
•
Safety glasses with side shields
•
Hearing protection
•
Safety-toed footwear
In addition, before servicing or maintaining the machine:
•
Tie back long hair.
•
Remove all jewelry (including rings).
Service training
Before servicing or maintaining the machine:
•
Read and understand the instructions contained in all manuals
delivered with the machine.
•
Familiarize yourself with the location and proper use of all
controls and safety devices.
•
Only trained personnel shall troubleshoot or repair problems
occurring with the machine.
•
Contact Wacker Neuson Corporation for additional training if
necessary.
When servicing or maintaining this machine:
•
Do not allow improperly trained people to service or maintain the
machine. Personnel servicing or maintaining the machine must
be familiar with the associated potential risks and hazards.
2.5.1
Do not attempt to clean or service the machine while it is running.
Rotating parts can cause severe injury.
2.5.2
DO NOT operate the machine without an air cleaner.
2.5.3
DO NOT remove air cleaner cover, paper element, or precleaner while
engine is running.
2.5.4
DO NOT alter engine speeds. Run the engine only at speeds specified
in the Technical Data Section.
WARNING