BA 1404 en – Edition 2.7 * 1404b510.fm
5-1
Maintenance
5 Maintenance
5.1
Introduction
Operational readiness and the service life of machines are heavily dependent on mainte-
nance.
It is therefore in the interest of the machine owner to perform the mandatory maintenance
Bear in mind the following points before performing servicing and maintenance:
• Chapter 2 “SAFETY INSTRUCTIONS” of this Operator’s Manual
• The Operator’s Manuals of the attachments.
Perform the prescribed inspections and rectify any disorders before putting the machine
into operation.
Secure the open engine cover and other open covers appropriately. Do not open the
engine cover and other covers on slopes or in strong wind.
When using compressed air, dirt and debris can be blown into your face. Therefore, wear
safety glasses, protective masks and clothing when using compressed air.
Daily servicing and maintenance, and maintenance according to maintenance plan
“A”
must be performed by a specifically trained operator. All other maintenance must be per-
formed by trained and qualified personnel only.
The maintenance plans indicate when the maintenance mentioned below must be per-
formed
Immediately repair or replace parts that are already damaged or not working properly
before they are due for replacement.
Notice!
Safety-relevant parts may only be repaired or replaced by a Wacker Neuson
dealer or a Wacker Neuson service center.
Parts
Interval
Hydraulic hoses
Replace hydraulic hoses every 6 years from
the date of manufacture, even if they do not
seem to be damaged.
Seat belt
No replacement necessary. Replace the seat
belt after an accident.
Summary of Contents for 1000164553
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...
