WACKER Group PG 2, Repair Manual

Page: 23 / 60

PG Pumps Operation
wc_tx000606gb.fm
19
3.6 To Start—Machines with Wacker Engines
See Graphic: wc_gr000655
3.6.1 Open fuel valve by moving lever down (a1) .
Note : If engine is cold, move choke lever to close position (d2) . If
engine is hot, set choke to open position (d1) .
3.6.2 Turn engine switch to “ON” (b2) .
3.6.3 Open throttle by moving it slightly to left (c2) .
3.6.4 Pull starter rope (e) .
Note : If the oil level in the engine is low, the engine will not start. If this
happens, add oil to engine.
3.6.5 Open choke as engine warms (d1) .
3.6.6 Open throttle fully to operate (c1) .
3.7 To Stop—Machines with Wacker Engines
See Graphic: wc_gr000655
3.7.1 Reduce engine RPM to idle by moving throttle completely to right (c3) .
3.7.2 Turn engine switch to “OFF” (b1) .
3.7.3 Close fuel valve (a2) .
a1
a2
b2
b1
c1 c2
c3
d2
wc_gr000655
e
d1