![background image](http://html1.mh-extra.com/html/wacker-group/0007587/0007587_repair-manual_866381041.webp)
Use Of Threadlockers and Sealants
Threadlocking adhesives and sealants are specified throughout this manual and should be used where indicated.
Threadlocking compounds normally break down at temperatures above 350° F (175° C). If a screw or bolt is hard
to remove, heat it using a small propane torch to break down sealant. When applying sealants, follow instructions
on container. The sealants listed below are recommended for use on WACKER equipment.
SEALANTS
TYPE
( ) = Europe
COLOR
USAGE
PART NO. - SIZE
Loctite 222
Purple
Low strength, for locking threads smaller than 1/4" (6 mm).
73287 - 10 ml
Hernon 420
Hand tool removable.
Omnifit 1150 (50M)
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
Loctite 243
Blue
Medium strength, for locking threads larger than 1/4" (6 mm).
29311 - .5 ml
Hernon 423
Hand tool removable.
17380 - 50 ml
Omnifit 1350 (100M)
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
Loctite 271 / 277
Red
High strength, for all threads up to 1" (25 mm).
29312 - .5 ml
Hernon 427
Heat parts before disassembly.
26685 - 10 ml
Omnifit 1550 (220M)
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
73285 - 50 ml
Loctite 290
Green
Medium to high strength, for locking preassembled threads
28824 - .5 ml
Hernon 431
and for sealing weld porosity (wicking).
25316 - 10 ml
Omnifit 1710 (230LL)
Gaps up to 0.005" (0.13 mm)
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
Loctite 609
Green
Medium strength retaining compound for slip or press fit
29314 - .5 ml
Hernon 822
of shafts, bearings, gears, pulleys, etc.
Omnifit 1730 (230L)
Gaps up to 0.005" (0.13 mm)
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
Loctite 545
Brown
Hydraulic sealant
79356 - 50 ml
Hernon 947
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
Omnifit 1150 (50M)
Loctite 592
White
Pipe sealant with Teflon for moderate pressures.
26695 - 6 ml
Hernon 920
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
73289 - 50 ml
Omnifit 790
Loctite 515
Purple
Form-in-place gasket for flexible joints.
70735 - 50 ml
Hernon 910
Fills gaps up to 0.05" (1.3 mm)
Omnifit 10
Temp. range, -65 to 300 degrees F (-54 to 149 degrees C)
Loctite 496
Clear
Instant adhesive for bonding rubber, metal and plastics;
Hernon 110
general purpose.
52676 - 1 oz.
Omnifit Sicomet 7000
For gaps up to 0.006" (0.15 mm)
Read caution instructions before using.
Temp. range, -65 to 180 degrees F (-54 to 82 degrees C)
Loctite Primer T
Aerosol
Fast curing primer for threadlocking, retaining and
2006124 - 6 oz.
Hernon Primer 10
Spray
sealing compounds. Must be used with stainless steel
Omnifit VC Activator
hardware. Recommended for use with gasket sealants.
Summary of Contents for 0007587
