Wachs RS-2, Manual

Page: 10 / 36

RS-2
10
SECTION III
SET-UP AND OPERATION
CONTROLS AND COMPONENTS
ELECTRIC RS-2
INTRODUCTION
It is impossible to determine how much torque a
valve stem can take before breaking. Size, age,
condition, tuberculation, and period of time since
last operation will have an effect to this. The
recommended start-up procedure for operating a
valve is to set the RS-2 to its lowest torque setting.
Forward/Reverse
Switch
Electric Motor
1/10th Counter
w/Reset Button
Power Head
Reset Button
On/Off
Trigger
High/Low
Torque
Setting
Switch
GFI
Ground Fault
Interrupter
!
!
Lifting Handles
CAUTION: DO NOT connect or disconnect hoses
to valve operator or power source while power
source is operating.
Universal Handwheel Operation
Dedicated Handwheel Operation
Valve Operator
Extension Handle
Valve Socket
Stop Collar
Valve Key Operation
Drive Plate
Drive Fingers
Straddle Clamps
Long, Medium, Short Torque Arms
Drive Fingers
Universal Handwheel
1” Drive Adapter