Technical Manual
WDGA with EtherNet/IP
5 - Webserver
© Wachendorff Automation GmbH & Co. KG
35
5.2 Information
5.2.1 Overview
Figure 5.1: Overview
In the overview you will find the following information:
•
Device type: designation of the encoder
•
Serial number: Device number of the encoder
•
Operating time in hours: Number of hours in running operation
•
Protocol: EtherNet/IP
•
Device status: On or Off state
•
Stack status: Connected or Offline
•
Device name: WDGA-EP
•
MAC device: MAC address of the encoder
•
MAC port 1: MAC address of Ethernet port 1
•
MAC port 2: MAC address of Ethernet port 2
•
IP address: IP address of your EtherNet/IP encoder
•
Netmask: Subnet mask of your EtherNet/IP encoder
•
Gateway: Gateway of your EtherNet/IP encoder
The refresh rate of the web page is fixed at 10 seconds and cannot be changed. You
can tell that the data is being updated by the message: "Refreshing data", at the top
right of the field where the refresh time is displayed.
You can switch the language of the web server after the call.
After switching in a sub-mask, the web server starts again in the start mask.
