WAC RC20-WT Operation Instructions Download Page 1

OPERATION INSTRUCTIONS

RC20-WT

Package Contents

       

Pairing

NOTE: Pairing must be completed within 3 minutes of turning 
the power on to the fan receiver.

To pair your remote control:
1.  Power cycle your fan by removing power from the circuit 

breaker for 10 seconds and then re-enable power.

2.  Press and hold 

 and 

 buttons on remote control 

for 4-5 seconds.

3.  The LED will blink green.
4.  The green LED along with audible beeps will indicate that 

pairing is successful.

5.  Test remote control using the steps in section 2.

1

  

 button: Switch between Summer and Winter Mode. 

SUMMER MODE (Counter-Clockwise): 
A downward airfl ow creates a cooling 
eff ect (

FIG. 3). This allows you to set 

your air conditioner on a warmer 
setting without aff ecting your comfort. 

WINTER MODE 

(Clockwise): 

An upward airfl ow moves 
warm air off  the ceiling area and 
re-distributes the warm air that hovers 
around the ceiling to the living space. 
This should allow for savings on 
heating costs (

FIG. 4). 

NOTE: On your fan, press the   button while the fan is running

       Remote Control Operation

    

  

                  Remote Control Button Functions

 button: Turns the light ON or OFF.

Press or hold   to increase the light level.
Press or hold   to decrease the light level.

 button: Turns the fan ON or OFF.

Press or hold the   button to increase fan speed.
Press or hold the   button to decrease fan speed.

2

Batteries

Remote

Wall Cradle

Screws

CR2032

CR2032

Press and Hold

NOTE: A maximum of 10 remote controls or wall 
controls can be used with a fan.

FIG.1

FIG.2

FIG.3

FIG.4

3

       Breeze Mode

1.  Breeze Mode mimics the natural ebb and fl ow 

of winds in nature by varying the fan speed.

         NOTE: Breeze Mode always rotates your fan 
         in the Summer (CCW) direction
2.  To start Breeze Mode, press  

 and 

 for 4 seconds. The LED will blink green 

and the fan will beep.

3.  To exit Breeze Mode and return to standard 

fan mode, press 

 and   for 4 seconds. 

The led will blink green and the fan will beep. 
Your fan will return to the direction and speed 
it was set to prior to entering Breeze Mode.

NOTE: Your fan features 6 speeds. An audible tone will 
indicate when the speed is increased or decreased. When 
the fan has reached the minimum/maximum speed level 
the fan will beep twice. 

Reviews: