WAC Lighting GEOS F-068L Installation Instructions Manual Download Page 24

F-068L

24

24

25

26

WACFan_841812

13

      RESET

Factory Reset

Press and hold buttons for 10 seconds 

Receiver Factory Reset

Press the reset button on the receiver 

until the receiver beeps

NOTE

: If advised by technical support, you can reset your fan to factory settings by 

either holding down the light toggle, fan toggle, and season button for 10 seconds or 
briefly depressing the reset button on the fan’s receiver. The fan will emit three beeps 
indicating the reset was successful.

NOTE

: Factory reset will remove remote control(s), wall control(s) and WAC  

app connections. 

NOTE

: If you change your Wi-Fi settings 

(SSID or Security Passphrase you will need 

to perform a Wi-Fi reset on the fan by 

 holding down the fan speed up and fan 

speed down buttons on the remote control 

for 10 seconds. The light on the remote  

will flash green and the fan will sound two 

 long beeps. You can then use the Modern 

Forms Fans app to connect your fan to the 

new network.

Fan Wi-Fi Reset

Press and hold the 

 and     for 10 seconds until LED  

blinks green and receiver emits 2 long beeps

Summary of Contents for GEOS F-068L





































Reviews: