2
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. November, 2017
waclighting.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION AND WIRING
STEP 1:
•
Wrap locking nut with thread seal tape to act as a sealant.
•
Mount fixture housing onto the canopy plate.
•
Tighten locking nut to secure fixture position.
STEP 2:
•
Connect the electrical wires as shown in
Fig.1
, making sure
that all wire connectors (A1) are secured. If your outlet box
has a green or bare copper ground wire, connect the fixture’s
ground wire to it. After wires are connected, tuck them
carefully inside the junction box.
STEP 3:
•
Mount fixture housing onto the junction box with
junction box screw (B1).
•
Tighten all conduit caps with thread seal tape.
Locking Nut
Fixture
Housing
Gasket
Junction Box
Junction Box Screw
B1
Wire Connector
A1
Conduit Caps
Canopy Plate
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Wiring
INSTALLATION INSTRUCTION
Single/Double Spot - Endurance
WP-LED415/WP-LED430
