31
Index
7.
Clamping fixture order no. 22312
41
7.1 Assembly
41
7.2
Drawing and legend
41
8.
Tapping attachment order no. 35805
42
8.1 Operation
42
8.2
Drawing and legend
43
9.
2-axis coordinate table K400 and K600
44
9.1 Assembly
44
9.2 Lubrication
44
9.3
Readjust the guides
44
9.4
Working instruction
44
9.5
Drawing and legend
45
9.6
Attachment kit for attached vernier calliper for 2 axes and spindle Y-axis
48
9.6.1
Replacement of the spindle Y-axis
48
9.7
Attachment kit for attached vernier calliper for 2 axes and spindle Y-axis
51
9.7.1
Installing the bracket for the attached vernier calliper
51
9.7.2
Installing the attached Y-axis vernier calliper
53
9.7.3
Mount the attached X-axis vernier calliper to article number 24410
54
9.7.4
Mount the attached X-axis vernier calliper to article number 24410
55
9.7.5
Drawing and legend
56
1. Delivery
Please check the following upon receipt of delivery:
1. wether the packaging has been damaged and/or
2. wether the device shows signs of transport damage or if there are reasons for complaints. In this case
we request your immediate notification. Claims made at a later date cannot be considered.
2. Safety instructions
1. Please note that for damages caused by not following these instructions, no liability is accepted.
2. The operator of the device must ensure that at least one copy of the operating instructions is kept close to the
device and is available to all persons who work with the device.
3. Wear safety goggles when working with the device.
4. Do not remove the drill chips with the hand. Use corresponding aids (hand brush, hook, paint brush).
5. The work pieces must be secured so that they cannot be entrained by the drill respectively by the milling tool.
6. Do not drill into the table.
7.
Work pieces must be fixed by appropriate fixing means e. g. V-blocks, machine vices.
8. Drill chuck keys or similar tools must not be attached to the device so that they do not get caught by the
spindle and get flung around.
