21
Installation
3. Verify the power supply.
Apply 12 volts DC to the blue wire (constant). Check the screen for the correct voltage (9.4 to 14
volts). Constant power voltage is displayed in the PRIMARY field.
4017037b
4017033a
4.
Check the Faults field on the Main Screen.
NONE
= No faults present, proceed with end of line test.
YES
= Faults present, double-click on “YES” to bring up the Fault Information Screen. You may also
select the Display menu at the top and then click on Faults to bring up the Fault Information Screen.
Use the information in the Repair Instructions field to perform the necessary repairs.
