13
Introduction - Hardware Components
5
Introduction - Hardware Components
TRAILERCAST is a trailer tracking device with an embedded SIM card, GSM antenna and GPS antenna. It
is designed for outside use. It is designed to be installed under the trailer. TRAILERCAST connects to the
trailer’s iABS or RSS
plus
.
TRAILERCAST UNIT
DIMENSIONS (L x W x H)
4019843a
Including fixing points (center to center):
105 x 103 x 45 mm
Including fixing points: 125 x 103 x 45 mm
Excluding fixing points: 84 x 103 x 45 mm
(Cf. Section 7 Fastening TRAILERCAST, page 17)
Hardware Description: Front view
4019844b
iABS/RSS
plus
PORT
FIXING
POINTS
(HEIGHT
15 MM)
Back view
4019845b
AIR VENT
CF. NOTE
NOTE:
Make sure that the air vent of the TRAILERCAST
unit is always accessible to air. Make sure that nothing
can block the air access of the air vent (DO NOT apply
glue/tape/silicone along the edges of the unit.) Mounting
the unit on any bracket should not block the air vent.
Side view
4019847a
Pin Assignment
4019846a
Device serial number: TPXX-XXXXXXXXXXXXXXX