WABCO 400 500 320 0, Maintenance Manual

Page: 32 / 188

32
Diagnostics
Fig. 6.3
4014081a
Tire Calibration
Tire calibration may be accessed from the Modify pull-down on the Main Screen. Figure 6.4.
Fig. 6.4
4003664b
The programmed number of millimeters for tire circumference is displayed on the Tire Calibration screen.
The allowable range is dependent on the number of teeth on the tone ring. Use the tire manufacturer‘s
recommended tire circumference in millimeters for this value. Enter the correct number of millimeters, and
enter the appropriate tong ring number, and press the Write button. Refer to the table below.
Tone Ring Teeth Tire Circumference (mm)
80 2048-3072
90 2304-3456
100 2560-3840