W6 N 707D free-arm Manual Download Page 87

Page: 87 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Service information

Service information

14 Service information

Do you have any questions regarding your cover?

•

Is your cover not working properly?

•

Do you have questions that the manual does not provide an

answer for?

•

Do you require specific spare parts?

Kindly contact us by email [email protected]
Moreover, W6 WERTARBEIT offers the following options on its website

free of charge. To access these, please go to our website using

www.w6-wertarbeit.de and select “Help”:

•

Criteria for the optimal threading of a W6 N 707D free-arm (4-min. video).

•

A tutorial video specifically for the W6 N 707D free-arm

•

Tips and tricks for the W6 N 707D free-arm

•

A visual selection of stitches and their use

•

The W6 sewing ideas support you with creative sewing projects. Take a

look at our website

Please read the manual and the safety notes carefully before operating the

sewing machine.

Please register you cover online to receive the full 10-year warranty.

To register your sewing machine, please go to www.w6-wertarbeit.de

and select “Service/Guarantee registration”.

W6 tip

Subscribe to our W6 newsletter. We will keep you up-to-date and you may

take part in our special promotions.

Please enjoy your new sewing machine.

W6 WERTARBEIT

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands