12
bottle is empty. Hold the device upright
during treatment and make sure the
solution is filled in the solution bottle
instead of the discharge bottle.
The device beeps
continuously or turns off
during treatment
Wipe the metal part in the discharge
bottle dry and let it air dry before
turning on the device again. Also,
reattach the filter in the device.
During treatment, always ensure metal
part in the discharge bottle is dry and
not in contact with the foam of the
discharge, the device beeps and stops
if the metal part is wet. Do short
passes on your skin so the foam will
not build up, also, empty the discharge
bottle once it starts to get full.
For further queries, please contact customer service.
9. Consumables
You can purchase more filter and solution from our website:
wskinco.com
10. Customer service
For more information see our website wskinco.com. This manual is also
available as a PDF download from the website. Contact customer
service to report unexpected operations or events, or any other problem
with the device. Our customer service email is: [email protected].
11. Disposal
Packaging:
Dispose of the packaging separated into single type
materials. Dispose of cardboard and carton as waste paper and film via
the recyclable material collection service.
Device:
Do not dispose with household waste! The WEEE directive
requires that you dispose of this electrical device (including all
