2
Operating the ISOTHERM 2000
WARNING:
Static Electricity can cause an EXPLOSION!
BEFORE opening a tank hatch, attach the grounding clamp to the hatch cover.
After you are done, close the tank hatch, THEN remove the grounding clamp.
WARNING:
REPLACE BATTERY WITH ANY GENERAL PURPOSE OR HEAVY DUTY 9-VOLT CELL. FOR
LONGER LIFE USE DURACELL 1604, ENERGIZER NO. 522, RADIOSHACK NO. 23-653,
EVEREADY NO. 1222, RAYOVAC NO. A1604.
Brief Description
The ISOTHERM 2000 is a hand-held portable digital thermometer designed specifically for use in
hazardous locations. The ISOTHERM 2000 is built to be durable and easy to operate. It displays
temperature readings on a 7-digit LCD with a backlight for easy reading in all viewing situations.
Turning the ISOTHERM 2000 on
PRESS AND HOLD
the power button to keep the Isotherm power on.
When the
POWER
button is DEPRESSED. The display will show:
8.8.8.8.8.8.8
This demonstrates that all of the display segments are still working. After the initial display, the
ISOTHERM 2000 will switch to displaying the current temperature (as measured by the tip of the
attached probe).
ISOTHERM 2000 Instructions
The ISOTHERM 2000 can read temperature in either Fahrenheit or Celsius. It also features a
digital calibration tool that allows precision calibration without "tweaking pots" or doing clumsy
calibration calculations.
ISOTHERM 2000 KEYPAD
Taking a temperature reading
WARNING:
Static Electricity can cause an EXPLOSION!
BEFORE opening a tank hatch, attach the grounding clamp to the hatch cover.
After you are done, close the tank hatch, THEN remove the grounding clamp.
Take the stainless steel probe and place it in the fluid to be measured. After the probe has been
in the fluid for approximately 30 to 45 seconds, turn on the ISOTHERM 2000 and read the current
temperature. For the greatest accuracy, leave the probe in the fluid for five minutes or more.
