Network Video Recorder
User Manual
Network Management
42
Issue: V4.2 (2018-08-15)
8.1.1
IP
Operation Steps
Step 1
Click
next to
DHCP
to enable or disable the function of automatically
getting an IP address. The function is enabled by default.
If the function is disabled, click input boxes next to
IP
,
Subnet mask
, and
Gateway
to set the parameters as required.
Step 2
Click
next to
Obtain DNS Automatically
to enable or disable the function
of automatically getting a DNS address. The function is enabled by default.
If the function is disabled, click input boxes next to
DNS1(default 192.168.0.1)
and
DNS2(default 8.8.8.8)
, delete original address, and enter new address.
Step 3
Click
Apply
to save IP settings.
----End
8.1.2
Port
Operation Steps
Step 1
Click
Port
page to access the port setting screen, as shown in Figure 8-2.
Figure 8-2
Port setting screen
Step 2
Set the web port, data port and client port.
Step 3
Click
Apply
to save port settings.
----End
Summary of Contents for 0E-4CHNVR2TB
Page 2: ......
