background image

18

Any product description (whether in writing or made orally by ADI or ADI’s agents), 

specifications, samples, models, bulletin, drawings, diagrams, engineering sheets, or 

similar materials used in connection with the Buyer's order are for the sole purpose of 

identifying ADI's products and shall not be construed as an express warranty or condition. 

Any suggestions by ADI or ADI's agents regarding use, applications or suitability of the 

products shall not be construed as an express warranty or condition unless confirmed to 

be such in writing by ADI. ADI does not represent that the products it sells may not be 

compromised or circumvented; that the products will prevent any personal injury

 

or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases 

provide adequate warning or protection. Buyer understands and will cause its customer to

 

understand that a properly installed and maintained product is not insurance or guarantee 

that such will not cause or lead to personal injury or property loss. CONSEQUENTLY ADI 

SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR 

OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE

 

PRODUCT FAILED TO GIVE WARNING. However, if ADI is held liable whether directly or 

indirectly for any loss or damage with respect to the products it sells, regardless of cause or 

origin, its maximum liability shall not in any case exceed the purchase price of the product, 

which shall be fixed as liquidated damages and not as a penalty and shall be the complete 

and exclusive remedy against ADI.

 

 

FOR THE AVOIDANCE OF DOUBT, ADI DOES NOT SEEK HEREUNDER TO EXCLUDE 

OR RESTRICT ITS LIABILITY IN RELATION TO (I) FRAUD, (II) DEATH OR PERSONAL 

INJURY DIRECTLY RESULTING FROM ITS NEGLIGENCE OR (III) ANY MATTER IN 

RESPECT OF WHICH, BY LAW, IT IS NOT PERMITTED TO RESTRICT ITS LIABILITY.

 

3. Limitation on Liability to Buyer’s Customers

 

Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer 

acknowledges that ADI shall only be deemed to give consumers of its products such 

statutory warranties as may be required by law and at no time shall Buyer represent to its 

customers and/or users of ADI products that ADI provides any additional warranties. By 

accepting the products, to the fullest extent permitted by law, Buyer assumes all liability for, 

and agrees to indemnity and hold ADI harmless against and defend ADI from, any and all 

suits, claims, demands, causes of action and judgments relating to damages, whether for 

personal injury or to personal property, suffered by

 

any person, firm, corporation or business association, including but not limited to, Buyer's 

customers and/or users of the products because of any failure of the products to detect 

and/or warn of the danger for which the goods were designed or any other failure of the 

products whether or not such damages are caused or contributed to by the sold or joint 

concurring negligence or 

fault of ADI.

 

Summary of Contents for 0E-32LEDMON2






















Reviews: