12
CAUTION
The wall mount must bear a minimum of five
times the monitor’s net weight.To mount your MONITOR
to the wall or another surface, you need to purchase a
VESA wall mount. Use four
PM
Ф
4.0
x
6mm
screws
(the
base
attachment screws removed in step 1 below are
PM
Ф
4.0 x
6mm) to attach the mount. The monitor mount VESA
hole pattern is
(0E- 27LED2 (100mm x 100mm))
Mountin
g Guide
Wall or Other Mounting with VESA Standard
Note:
Metric (
PM
Ф
4.0
x 6 mm) is the type screw that should be used (do not use longer
screws or the monitor may be damaged).
1. Before mounting the monitor, remove the base riser (vertical portion of the base) by
removing the two screws near the top with a screwdriver. Then the base and the
riser can be removed. In order to prevent losing these screws, we suggest replacing
the screws in their original holes.
2. Attach the VESA mount (0E -
27LED2 (100mm x 100mm))
plate to the rear of the monitor and follow all of the instructions provided with the
mount to complete the mounting process.
