W Audio ZENITH 3000, Operation Manual

Page: 10 / 16

OFF 80Hz 125Hz
LOW PASS -A
LINK A
LINK B
INPUT A
INPUT B
PIN1:
PIN2:
PIN3: SIGNAL GND
SIGNAL +
SIGNAL - PIN1:
PIN2:
PIN3: SIGNAL GND
SIGNAL +
SIGNAL -
OFF 35Hz 80Hz
HIGH PASS -A
STEREO PARALLEL BRIDGE
MODE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
OUTPUT B
Push To Reset
26dB 32dB 0.775V
GAIN
~2202 40V 16A 50/60Hz
OUTPUT A
OUTPUT ASSIGNMENT
PIN 1+ :
PIN 1- :
SIGNAL
GROUND
+
+
35Hz
HIGH PASS -B LIMITER
OFF ON
80Hz
LOW PASS -B GROUND
LIFT GROUND
OFF 80Hz
OFF 125Hz
www.prolight.co.uk
ZENITH 3000
8 stereo 21 000W
4 stereo 21 600W
page 10 Operation Manual
2 Setup
2.6.3 Bridge-Mono Mode
2.6.4 Low Cut Filter
2.6.5 Low Pass Filter
2.6.6 Limiter
SPEAKERS
Figure 2.7
System Wiring, Bridge-Mono Mode
Typical input and output wiring is shown in Figure 2.7.
Low Cut Filter cuts off signal frequency below
30/80Hz or 50Hz
Low Pass Filter allows only frequencies below
80Hz or 125Hz without the use of external crossovers
when driving subwoofers.
To avoid serious clips when long term operation at dynamic
signal input.
Professional Power Amplifier