W Audio SR 10 User Manual Download Page 4

www.prolight.co.uk

SR 10 Passive Speaker

  

User Manual

4

Safety advice

The given maximum power of the speaker system describes short term peaks the system can 
handle as a maximum. The corresponding RMS power is - as of all comparable systems (also from 
other manufactures) - significantly lower. The maximum power of the speaker system must never be 
exceeded. When operating the speaker system, please make sure that the system always sounds clear. 
When distortion can be heard, either the amplifier or the loud speaker is being overdriven. Overloads 
can quickly lead to amplifier or speaker damage. In order to avoid damage, please reduce the volume 
immediately when distortion can be heard. When speaker systems are damaged by overdriving, the 
guarantee becomes void.

• The ambient temperature must always be between -5˚ C and +45˚ C.  

Keep away from direct sunlight (particularly in cars) and from heaters.

• The relative humidity must not exceed 50% with an ambient temperature of +45˚ C.
• This speaker system must only be installed at a solid, horizontal, anti-slip,  

vibration and oscillation free fire resistant location.

• Please note: When using this speaker system in public or industrial areas, a series of safety 

instructions have to be followed that this manual can only give in part. The operator must  
therefore inform himself on the current safety regulations.

• Before installing the system, make sure that the installation area can hold a minimum  

point load of 5 times the systems weight (e.g. weight 20kg - point load 100kg).

• The speaker system must never be installed higher than 100cm with out a secondary attachment.
• For over head installations (mounting height >100cm), always fix the speaker system  

with an appropriate safety cable.

• The installation area of the speaker system has to be built and constructed in a way that it  

can hold 10 times the weight of the speaker for 1 hour without any deformation.

• 

The installation area of the speaker system has to be built and constructed in a way that it  
can hold 10 times the weight of the speaker for 1 hour without any deformation.

These speakers can be mounted on a speaker stand using the supplied adaptors. The carrying capacity 
of the extension pole and the speaker stand must never be exceeded.

DANGER TO LIFE - DUE TO FALLING SPEAKERS SYSTEMS!

THE SUBWOOFER MUST NEVER BE SUSPENDED.
THE MID/HIGH SPEAKER MUST ONLY BE SUSPENDED BY  

EXPERIENCED AND TRAINED PERSONS.

Summary of Contents for SR 10









Reviews: