Connections
This speaker system is equipped with 2 pole 6.35mm jack speaker sockets. Speaker connections
should only be made while the mixer amplifier is powered off.
Installing the speaker cables
Connect the speakers to the left and right speaker sockets. The signal will be transmitted to the
individual speakers.
Always treat the cables carefully and protect them from damage during transportation.
Always install the cables in a structured way and protect them from damage.
The cables must be installed in a way that no person can trip over them. Always fix the
cables with an appropriate tape etc.
Should the supplied speaker cables need replacement, please ensure good quality speaker cable
is used (ie. CABL28). Do not use guitar cables or signal cables.
Installation
Stacking
This speaker system may only be installed on top of another speaker system if both systems are
clamped up to each other via appropriate clamping belts and protected against tilting over.
9
